Export Banana Gate Type Plastic Mould
1) Whether the location of the parting surface and finishing accuracy meet the need, whether the material will overflow or not, whether the plastic parts can be left on the mold with the ejector after the mold is opened.
2). The demolding method is correct, to promote the rod, pushing the tube size, location, the number is appropriate, the push plate will not be stuck by the core, will not cause scratches forming parts.
3). Mold temperature adjustment. Heater power, quantity; cooling medium flow line location, size, quantity is appropriate.
4) The method of processing the concave parts of the plastic parts is suitable for removing the concave part, for example, whether the slider and the push rod in the bevel guide core pulling mechanism interfere with each other.
5) pouring, exhaust system location, size is appropriate.
5. Design drawings
1) .All assembly parts on the mold parts placement is appropriate, that is clear, with or without missing
2) Parts number, name, production number, internal or external parts, standard parts or non-standard parts, parts with precision, high-precision molding plastic parts at the size of the correction processing and margin , Mold parts of the material, heat treatment, surface treatment, the degree of surface finishing mark whether or not to describe clearly.
3). The main parts of parts, forming parts work size and size. Size figures should be correct, do not make the producer conversion.
4). Check the view of all the parts and assembly drawing position, projection is correct, drawing method is consistent with the national standard drawing, with or without missing size.
6. Check processing performance
(All parts of the geometry, view drawing, size, etc. are conducive to processing)
7. Re-calculate the main working dimensions of aids
Q: Do your guys can design 2D and 3D mould?
A: Yes, we do. You may send RFQ to have a testing!
Q: Do your guys have experience in pen mould making?
A: Yes, we do. You may send request details to us such as (HASCO STANDARD or LKM or Chinese mould base, quantity ,mould life) etc…!
Q: Do your guys have experience in game project such as housing or train?
A: Yes, we do. You may send request details to us such as (cavity ,parts material ,rapid tool or mass production tool ,HASCO STANDARD or LKM or Chinese mould base, quantity ,mould life) etc…!
Q: Do your company can support moldflow ?
A: Yes, we do. There separate it in two conditions, one is do normal moldflow analysis in house, its cheap; the other one is do it through our sub-contractor, this is expensive but very details, can involve shrinkage , deformation, etc.. details, and will also can submit MFR format.