Stamping Parts Radiator Tube Parts
sheet metal computer case and precision metal bending parts or bending stamping parts radiator tube parts
When we want to use the terminal mold for stamping, in order to avoid damage to the stamped workpiece, or can not be used normally, we also need to pay attention to the following matters.
The spacing of the inner guide legs is required to be kept correct and uniform, and the imprinting process will reduce the interval, so it is necessary to control the imprint depth and suppress the lateral reflex of the guide pins.
The front section of the lead leg in the lead frame requires high flatness, and the flat portion area is at least 0.1 MM or more (greater than three times the diameter of the gold wire), so an embossing process must be used.
The flatness of the lead frame is required to be high in order to ensure the stability and smoothness of the subsequent construction. Corresponding strategy is to suppress the amount of recurve amount and the direction of recursion when punching the guide pin. In addition, the lead frame material before stamping should be subjected to stress relief engineering.
Deformation requirements such as distortion or offset of the guide pins in the lead frame are minimized, which is advantageous for subsequent operations. The solution should pay attention to the strong pressure design of the pressure plate in the mold, set the most suitable mold clearance and action components (punch and master), the knife part should be kept in the best state, and the mold guiding device is high in rigidity.
The positional accuracy of the inner guide pin must be kept correct to facilitate the subsequent adhesion of the project. The corresponding strategy is to punch the inner guide pin and then punch the outer guide pin to correct the design, and design the adjustment station in the press process. To suppress the offset of the position of the lead frame of the lead frame during the stamping process.
• We manufacture and serve according to clients' drawings precisely and efficiently.
• We have QC testers with rich experiences.
• Check the raw material before starting production
• Have the random inspection during the processing.
• Make the 100% inspection before the shipments.
Passed the ISO9001:2008 quality system authentication and ROHS authentication.
All prototype products have to go through 4 checks in the whole process:
1. Raw material inspection
2. In processing inspection
3. Final inspection
4. Outgoing inspection
Q:Where is your location?
A:We are located in DONGGUAN City. It takes 30minuts by car from SHENZHEN Airport our company.
Q:How can I get a quotation?
A:Please send inquiry to us, providing your 2D or 3D drawing with specifications(eg: materials, dimension, tolerance, surface treatment etc.) or offering a sample, the best quotation will be provided for you very soon.
Q:What logistics ways can we work for shipment?
A:We can ship by various ways according to the size and expected time.
1.For 90% of our shipment, we will go by sea, to all main continents such as North America, Europe, Southeast Asia, Middle East, Oceania, etc. either by container or LCL.
2.Depending on customers' requirement, we also arrange air shipment or delivery service.