Laser Cut Sheet Metal Parts

Specializing in the manufacture of metal frame, chassis, etc. Mainly for the electrical industry, electrical switch manufacturing, aerospace, food machinery, textile machinery, engineering machinery, motorcycle manufacturing, agriculture and forestry machinery, elevator manufacturing, special vehicles, household appliances manufacturing, IT manufacturing, petroleum machinery manufacturing, food machinery, welding diamond tools, gear welding, metal surface treatment, decorative advertising, laser processing services and other external processing machinery manufacturing industry.
Chat Now

Product Details

Laser Cutting Sheet Metal


The obvious advantage of laser cutting


Laser cutting uses a focused high-power-density laser beam to illuminate a workpiece, causing the material to be irradiated to rapidly melt, vaporize, ablate, or reach a flash point. At the same time, the molten material is blown off by a high-speed airflow coaxial with the beam, thereby cutting the workpiece. open. Laser cutting is one of the hot cutting methods.


Laser cutting is characterized by fast cutting speed and high quality. Specifically summarized as the following aspects.

(1) Good cutting quality

Laser cutting can achieve better cutting quality due to the small laser spot, high energy density and fast cutting speed.

1 The laser cutting slit is narrow, the slits are parallel and perpendicular to the surface, and the dimensional accuracy of the cut parts can reach ±0.05mm.

2 The cutting surface is smooth and beautiful, the surface roughness is only a few tens of microns, and even laser cutting can be used as the last process. No machining is required, and the parts can be used directly.

3 After the laser is cut by the laser, the width of the heat-affected zone is small, the performance of the material near the slit is almost unaffected, and the deformation of the workpiece is small, the cutting precision is high, the geometry of the slit is good, and the shape of the slit cross-section is relatively regular. Rectangular.

(2) High cutting efficiency

Due to the transmission characteristics of the laser, the laser cutting machine is generally equipped with multiple numerical control worktables, and the entire cutting process can realize numerical control. During operation, it is only necessary to change the numerical control program to apply the cutting of different shapes of parts, which can perform two-dimensional cutting and three-dimensional cutting.

(3) Fast cutting speed

Cutting a 2mm thick low carbon steel plate with a power of 1200W, the cutting speed can reach 600cm/min; cutting a 5mm thick polypropylene resin plate, the cutting speed can reach 1200cm/min. The material does not need to be clamped and fixed during laser cutting, which saves the fixture and saves the auxiliary time of loading and unloading.

(4) Non-contact cutting

There is no contact between the torch and the workpiece during laser cutting, and there is no tool wear. To machine parts of different shapes, there is no need to change the "tool", just change the output parameters of the laser. The laser cutting process has low noise, low vibration and no pollution.

(5) There are many types of cutting materials

There are many types of laser cutting materials, including metal, non-metal, metal-based and non-metal matrix composites, leather, wood and fiber.

(6) Disadvantages

Laser cutting Due to the limitation of laser power and equipment volume, laser cutting can only cut medium and small thickness plates and tubes, and the cutting speed decreases significantly as the thickness of the workpiece increases.




Our Service
• We manufacture and serve according to clients' drawings precisely and efficiently.
• We have QC testers with rich experiences.
• Check the raw material before starting production
• Have the random inspection during the processing.
• Make the 100% inspection before the shipments.

Laser cut sheet metal parts

High quality
Passed the ISO9001:2008 quality system authentication and ROHS authentication.


sheet metal factory


All prototype products have to go through 4 checks in the whole process:
1. Raw material inspection
2. In processing inspection
3. Final inspection
4. Outgoing inspection


sheet metal parts


What's your advantage?
1)Competitive price
2)High quality control: 100% full inspection before shipment.
3)High precision, tolerance can be ± 0.01mm
4)Fast lead time (5-7days for samples, 12-40 days for mass production)
5)Non-standard, OEM, customized services provided
6)No MOQ, small QTY order is welcome.
7)ISO 9001:2008 certificated factory, using ROHS materials.

Precision measure device

 

Q: Do you do polish in house or outsourcing ?
A: We have our own after finish department, there have 5person in that team. You may visit to our website for more details or just send email to us!

 

Q: Do you have experience for container shipment?
A: Yes,we do , though the experience is not at current factory, but our shipper in charge whom has more than 9years shipping export experience. We can support both air and sea booking shipment.

Inquiry