Rapid prototype plastic parts
CNC milling and machining ; 5axis machining ;
car engine aluminum cover production instructions
2. After the two sides are finished, the shape is not milled, and the workpiece and the edge material are connected as a whole. The purpose is to facilitate the processing of the position of the column, the round hole and the oil port on the side.
3, CNC machining short-term columns and round holes; first leveling the workpiece with a dial gauge to level; then check whether the workpiece is horizontal, milling a "ten" frame at the top of the edge material, deep 0.5MM length and width Evenly divide; determine that it is horizontal and can be processed.
4. The spark machine processes the long hole and the column. Because the length of the workpiece exceeds 500, the Z value of the CNC is not enough.